rear axle

英 美
  • 后轴
  • reach v.到达;伸出;达成;取得联系;延伸;(伸手)去够n.范围;影响力;河段;等级
  • reach bottom 到底,查明,打听出来
  • reach out 伸出;伸展
  • reach up to adj.扩展到(达到)
  • reachable adj.可达成的;可获得的
1. The rear axle carries the greatest weight.
后轴负荷最重的分量。

youdao

2. Then a rear axle gets stuck in the snow a little.
但不久后桥便较浅的陷进积雪中了。

youdao

3. On RWD cars, it is part of the rear axle assembly.
在后轮驱动车辆上,它通常也是装配在后轮驱动桥上。

youdao

4. The effective initial turning centre is behind the rear axle.
实际的初始转向中心在后轴之后。

youdao

5. Remove cardan shaft from rear axle differential and tie it up.
从后轴差速器上拆下万向节轴并将其绑紧。

youdao

6. The fracture occurred on the rear axle end of heavy automobile.
某重型汽车后桥轴头发生断裂。

youdao

7. You shouldn't end with a car with nonfunctional engine and twisted rear axle.
你不该这样结束了无功能的车发动机和扭曲后车轴。

youdao

8. Because of inertia, the front and rear axle load will shift when a vehicle braking.
由于惯性的影响,汽车在制动时,前后轴载荷会发生转移。

youdao

9. To further improve motoring sensation, BMW introduces a new kind of rear axle in 1990.
为了进一步提高其受欢迎程度,BMW于1990年推出了一种新的后轮轴。

youdao

10. The quenching distortion of rear axle spiral bevel gear used in FLAT tractor is studied in this paper.
研究了菲亚特拖拉机后桥大圆锥螺旋齿轮淬火变形规律,分析了原淬火压模存在的问题。

youdao

11. Walking machine adopts the transmission input power, high intensity, rear axle assembly capacity is big.
机械行走采用传动输入动力,后桥总成强度高,承载力大。

youdao

12. On all vehicles it is important to remember that the rear axle dictates the position of the front wheels.
对所有车辆,这是重要的是要记住,该后轴发号施令的地位前轮。

youdao

13. The fracture of motorcycle rear axle has been analyzed through optical microscope, SEM and hardness test.
采用光学显微镜、扫描电镜、硬度测试等方法,对摩托车后轮轴断裂件进行了分析。

youdao

14. Company specialize in automobile fittings, sandy beach car rear axle always succeeding and auxiliary products.
公司专业生产汽车配件及其配套产品。

youdao

15. The bike chain drives a sun gear on the rear axle, which transmits power to planetary gears situated around it.
自行车的链条会驱动后轮轮轴上的太阳齿轮,将动力传送到四周的行星齿轮。

youdao

16. For connecting the output shaft of the gear box to the rear axle, a ling shaft known as propeller shaft is used.
为把齿轮盒子的输出桥连结到后面的轮轴,鳕即是螺旋桨桥的桥被用。

youdao

17. The rear axle assembly equipment tires, can also be assembled steel wheel, formed three steel wheel, one machine.
该设备后桥可装配轮胎,也可以装配钢轮,形成三钢轮,一机两用。

youdao

18. The assembly quality of automotive rear axle differential reducer is an important factor for the entire car performance.
汽车后桥差减速器的装配质量是影响整个汽车性能的一个重要因素。

youdao

19. A software function that allows you to read the front and rear axle loads on trucks equipped with EBS and air suspension.
使用该软件功能,您可以在安装了EBS和空气悬挂的卡车上读取前、后轴的载荷。

youdao

20. Distributes the moment released by the gear via the cardan shafts to the frontaxle final drive or rear axle differential.
通过万向节轴将齿轮传递的力矩分配给前轴主减速器或后轴差速器。

youdao

21. But the European Jetta keeps the Golf's multilink rear axle; U. S. models get a specially developed torsion-beam rear axle.
但欧洲捷达保持高尔夫的多重后轴,美国的一个专门开发的模式得到扭转梁后桥。

youdao

22. The differential is part of the rear-axle-housing assembly, which includes the differential, rear axles, wheels and bearing.
差速器是后桥壳总成的一个部件,后桥壳总成包括差速器、后桥、车轮和轴承。

youdao

23. The one-dimension and two-dimension load spectra are used to predict the fatigue life of the rear axle in EQ1030T light truck.
分别利用一维和二维载荷谱对EQ1030T型轻型车后桥进行了疲劳寿命预测。

youdao

24. The test results show that the average life of gear can increase40%approximately by taking peen shot for rear axle pinion gear.
台架试验表明,采用该喷丸机对后桥主动锥齿轮进行强化喷丸处理,齿轮的平均寿命提高约40%。

youdao

25. The analysis of calculated results shows that overloading is the main reason for tho damage of rear axle, housing of the truck.
对计算结果的分析认为,超载是该车后轴壳损坏的原因。

youdao

26. By using non-linear finite element theory, a non-linear finite element model for hydroforming for rear axle housing is established.
利用非线性有限元理论方法,建立了后桥壳液压胀形有限元模型。

youdao

27. This paper describes the causes, appearance and remedy of fractured fastening bolts in driven bevel gear of TATRA model T815 truck rear axle.
介绍了太脱拉T815型汽车后桥从动圆锥齿轮联接螺栓发生断裂的原因、现象和解决方法。

youdao

28. This article introduces an innovative technology of mini-mobiles rear axle casing, namely a non-machining little distortion welding technology.
介绍了微车后桥壳焊接的一种新工艺,即是小变形不加工的焊接技术。

youdao

29. The reason the propeller shaft shortens as the Angle increases is that the rear axle and differential move in a shorter ARC than the propeller shaft.
当角度增加时,传动轴变短的原因是后桥和差速器运动的弧度小于传动轴运动的弧度。

youdao

30. The reason the propeller shaft shortens as the Angle increases is that the rear axle and differential move in a shorter ARC than the propeller shaft.
当角度增加时,传动轴变短的原因是后桥和差速器运动的弧度小于传动轴运动的弧度。

youdao

    1. The back axle of the bus was broken.
      公共汽车的后轴断了。
    2. The rear axle is stationary, and is bolted rigidly to the main frame.
      后轴是固定的,用螺栓刚性固定在主机架上。
    3. It has many advanced equipments, such as driving axle spiral bevel gears processing lines from Gleason Company and the ring gear &pinion producing machines from Mitsubishi Company.
      工厂生产设备先进,拥有美国格里森后桥螺旋伞齿轮加工线和日本三菱公司圆柱齿轮加工设备。

rear axle的相关资料: